| A rubber Including mixing the raw materials, the color of the color, weight calculation etc. Two, curing molding The silicon collagen material is formed by the high temperature vulcanization by using the high pressure vulcanization equipment. Three, trimming From the mold and silicone products will be joint some useless edges, Chad, the need to remove; in the industry, this process fully completed by hand, some factories also useful punch. Four, grinding Due to the production environment is not a vacuum, mobile phone sets of silicone inevitably contaminated with dust and impurities or boot personnel dirty the products, some of it is not clean out of, at this time only by grinding modified mobile phone sets, as long as the customer acceptance and fine grinding processing can reduce cost, reduce waste. Five, clean Most of silicone products to be clean, dirty is more on the process, because in front of the process may be dirty mobile phone sets of silicone. Through the air to blow off the dust and impurities, clean cloth and clean water that day, to the customer satisfaction of products. Six, spray feel oil Most mobile phone sets of silicone spray handle need oil, to complete such a procedure will allow mobile phone sets of silicone product quality increase level. Most ink manufacturers can provide environmentally friendly feel oil. Good mobile phone cover a look at the design of the two look feel. Some spray booth spray, some oil tank soaking methods. Seven, baking Spray hand oil to the phone after drying, after a high temperature oven about 15 seconds of baking, you can move to one side of the cooling package. |